|
|
Operating Mode:
|
Asynchronous, simplex or full
duplex |
|
Input/Output Interface:
|
RS232-C, Type D Asynchronous at 110 bps to 56 Kbps. DTE or DCE via null modem switch in Modem |
|
Transmission Line Interface:
|
Two ST fiber optic connector
Receptacles for interfacing with fiber optic duplex cable. SMA connector is an option |
|
Transmission Distance:
|
6600 ft (2000 m) (5 km option) |
|
Transmitter Enabled by RTS:
|
RTS/CTS delay 15ms |
|
Constant and Controlled Switch for Carrier:
|
Constant = RTS is always true |
|
Optical Power into a 50 Micron Core Optical Fiber:
|
0.5microwatts, 15dB power
budget @ 880 nanometers |
|
Receiver Sensitivity:
|
15 nanowatts at less than 10-9 bit error rate |
|
Diagnostics:
|
Build-in logic probe |
|
Operating Temperature:
|
0 °C to 50 °C |
|
Input Power:
|
105 to 130VAC, 50-500Hz,
10W power transformer
secondary fused for wall outlet |
| 220Volt Version: |
Model 2005V |
| Metal Enclosure: |
7.5"X7"X3" (19X17.8X7.cm) |
| Weight: |
3lb. (1.36kg) |
| Rack Mount Version: |
Model 2305 |
UL Listed. Meets FCC requirements of Class A, Part 15 Computing Devices Standard.
Specifications subject to change without notice.
|
Model 2005 Bit-Driver® is an asynchronous simplex or full duplex system capable of transmitting data at operating
speed from 110bps to 56 Kbps over fiber optic cable. Fiber optic cable offers the advantage of small size, light
weight and complete electromagnetic freedom from the problems of EMI/RFI to its maximum operating range of up to
6600 feet.
Totally dielectric fiber optic cable is immune to high voltage and lightning. This compact asynchronous system
can help you transmit data in-house or in other short-haul applications through the noisiest operating environments
without losing a bit. (Bit error rate < 10-9) It's a stand-alone component, complete with RS-232
interface, 120 volt power cord plus input and output transmission connections.
LEDs are used to indicate the presence of carrier and data signaling over the data path. There is a diagnostic
logic probe to verify "high" or "low" status of TD, RD, TSR, CTS, DSR and DCD circuits -- without
a breakout unit. Includes null modem switch to configure the modem as a DTE device instantly, and a constant or
controlled carrier switch.
TRANSMISSION LINE INTERFACE
Operating distance is dependent upon optical fiber core diameter and the cable's optical attenuation. The table
below indicates three cables that may be used at any data rate. These cables are available in connectorized assemblies
to meet the exact configuration of your application.
S.I.Tech offers complete links including fiber optic cable, connectors, cable assemblies, and Bit-Drivers®.
|
