Measured jitter on the 2856 TTL to Fiber Bit-Driver. |
Document: 10113
Category: 2856 TTL to Fiber Bit-Driver
Date Posted: 01/09/12 |
Problem
What is the jitter on the 2856 model running at T1 speeds?
Solution
The 2856 Jitter measured at 1.54 Mbps (T1 Rate) is less than 3 nsec. We
used a short fiber, <1 meter, and with a long fiber with 10 dB loss to get this result.
Note:
1. We suggest single channel unit S.I. Tech #2817, if you need just 1 channel TTL.
2. We also make S.I. Tech Model 2816 for high speed TTL.
Back to Technical Support
|